Navigation:SATA TECHNOLOGY CO., LTD >>Product >> Flammability Test Equipments >> ST-7606Z Wire & Cable resistance to Fire with Mechanical Shock Tester
Product

ST-7606Z Wire & Cable resistance to Fire with Mechanical Shock Tester

Introduction

ST-7606Z Wire & Cable resistance to Fire with Mechanical Shock Tester

Product Details

 

ST-7606Z Wire & Cable resistance to Fire with Mechanical Shock Tester
Standards: Standards: According to IEC60331-11, IEC60331-21, IEC 60331-1, IEC 60331-2, EN50200, EN50362, BS6387: 1994, BS7846, BS8431-1, BS8434-2, BS8491 etc
Scope: Used for testing wires & cables with the rated voltage through the different refractory level, detect the fire resistance of the insulation, check insulation whether breakdown and circuit’s integrality
Main parameters:
1.     Shock testing wall: Material of resistance to fire and hot composition board and the size is L900*W300*D9mm,weight:about 10±2kg including frame
2.     Metal frame: 2 stainless steel tube, one for up and down, size: W25*D25* L1000mm
3.     Testing power: output voltage continuously adjustable during AC0-100V,current: AC0.01-0.70A, four circuits independent continuously adjustable
4.     Heat withstand pip: φ3.0*L300mm, thermocouple fixed onto the end of heat withstand pip to test temperature
5.     Shock speed: 30±2s/T , shock at the level of 60 °
6.     Timer: 0.0199.99S/M/H setting continuously
7.     Ribbon burner: nozzle length: 500mm;width: 15mm, contain the Venturi mixer
8.     Burning gas: propane or other gas
9.     Testing temperature: 650950℃
10.   Specimen size: Length about 400mm
11.   Temperature sensor: ø 2.0 mm Platiniridium temperature sensor , 810mm from the bottom of the worktable
12.   Shock bar: ø25mm, cylindrical, length: 600mm

  • ©Copyright@SATA TECHNOLOGY CO., LTD
  • Tel:+86 769 83814636 FAX:+86 769 83509758
  • Address:Changping Town, Dongguan City, Guangdong Province, China 523560
Keywords:Cables Fire Resistance Tester, BS 6387 Catalog Z Testing, Cable Resistance to Fire testing