Navigation:SATA TECHNOLOGY CO., LTD >>Product >> Flammability Test Equipments >> ST-7606S Wire & Cable Resistance to Fire with Water
Product List
- New Products
- Wire & Cable Testing Equipment
- Flammability Test Equipments
- Material Testing Machines
- Environmental Test equipment
- Optical Measurements
- Hardness Meters
- Safety Instruments
- Density Meters
- Accessories of Tensile Machine
- PID Temperature Control Meters
- Automatic Locking Screw Machin
- Other Testers
Product
ST-7606S Wire & Cable Resistance to Fire with Water
Introduction
Product Details
ST-7606S Wire & Cable Resistance to Fire with Water
Standards: According to IEC60331-11, IEC60331-21, IEC 60331-1, IEC 60331-2, EN50200, EN50362, BS6387: 1994, BS7846, BS8431-1, BS8434-2, BS8491 etc.
Scope: Used for testing wires & cables with the rated voltage through the different refractory level,detect the fire resistance of the insulation, check insulation whether breakdown and circuit’s integrality
Main parameters:
1. Testing power: AC0-1000V, continuously adjustable, current: AC0.01-0.70A,four circuits independent continuously adjustable
2. Ribbon burner: nozzle length is 500mm, width is 15mm, contain the venturi mixer
3. Burning gas: propane or other gas
4. Testing temperature: 650±40℃
5. Specimen size: length: about 400mm
6. Temperature sensor: ø 2.0 mm Platiniridium temperature sensor, below the specimen
7. Spraying head pressure: During 250-350Kpa, flowing speed: 0.25-0.3L/S.m2
- ©Copyright@SATA TECHNOLOGY CO., LTD
- Tel：+86 769 83814636 FAX：+86 769 83509758
- Address：Changping Town, Dongguan City, Guangdong Province, China 523560
