ST-8604 Economic Material Tensile Testing Machine

Introduction

Product Details

Main feature:

1. The surface of appearance using electrostatic spray, simple and generous, multi-functions and economy

2. Force value displayed by LCD , discernible the force of tension or pressure, LCD display clearly

3. Units: N, Kgf and Lbf three kinds of units for option and automatically exchange;

4. LCD with backlight can be used in low-light environment

5. Single measurement, it can record the max force of tension and compression in both directions, automatic or manual cleared to zero.

6. The system would shut down if overload or over-trip

7. Structure of single-column is beautiful, sophisticated and economy.

Applicable range:

It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical property test.

Technical parameters:

1. Maximum Load: 5KN.

2. Capacity choice: 1KN, 2KN, 5KN option.(from U.S.A.)

3. Accuracy of load measurement: ± 0.5% (full range of 5% -100%)

4. Units: Kgf, Lbf, Nf

5. Resolution: 1 / 50000

6. Displacement resolution: 0.001mm

7. Driver: AC motor, deceleration device

8. Control system: testing speed 50~300 mm/min with step less speed and 5 fixed-speed (50,100，200，250,300) or the other needs of customer.

9. Data sampling frequency: 200times/sec

10. displacement: 1200mm。

11. Safety devices: overload, emergency stop devices, limited devices of displacement, leak current protection device

12. Machine has function of printing.

13. Can store 10 testing results and auto-calculate its average, auto-grab maximum force and the force at break.

14. Display: LCD display, membrane touch keys, with the following functions.

① Single test, 10-point statistics manually and automatically calculate its average and break values;

②. Multi-unit automatically exchange such as kgf, Lbf, N;

③. Function of free to take point;

④. With multi-calibration function;

⑤. Auto printing function;

⑥. Using 24-bit AD acquisition, resolution 1 / 200000;

⑦. Decimal digits 0 to 4 arbitrary choice;

⑧. Starting up using password protection feature, which can effectively prevent the non-operators to use

⑨. Ratio of Breakpoint from 0 ~ 99%, which the user can set according to different materials to stop the machine

⑩. Overload protection function can be set, effectively preventing machine from overload;

15. Power supply: AC 220V single-phase.

Last Page：ST-8605A Desktop Digital Tensile Testing Machine Next Page：ST-8603T Desktop Computor Sevo High Temperature Tensile Testing Machine

New Product

Tel：+86 769 83814636 FAX：+86 769 83509758
Address：Changping Town, Dongguan City, Guangdong Province, China 523560

Keywords:Material Testing Machine, Force testing machine, Tensile testing machine