Navigation:SATA TECHNOLOGY CO., LTD >>Product >> Material Testing Machines >> ST-8610 Series Digital Push & Pull Force Gauge
Product List
- New Products
- Wire & Cable Testing Equipment
- Flammability Test Equipments
- Material Testing Machines
- Environmental Test equipment
- Optical Measurements
- Hardness Meters
- Safety Instruments
- Density Meters
- Accessories of Tensile Machine
- PID Temperature Control Meters
- Automatic Locking Screw Machin
- Other Testers
Product
ST-8610 Series Digital Push & Pull Force Gauge
Introduction
Product Details
ST-8610 Series Digital Push & Pull Force Gauge
Used range: Applied to test various push and pull force to difference specimen to be demand, General it use alone with some test device.
Main Parameter:
1. Test Accuracy: Within ±0.2%F.S;2. Accuracy of show again: within ±0.1%F.S;3. Responsive speed: 10～320Hz;4. Displayer: 4 digitals of 12mm LCD;5. Memory method: Maximum value and instantaneous value;6. Max. capacity: 120% F.S (when up to 105% of F.S will display “OVR” words which means over load);
7. Batteries: 4.8V recharge batteries, Continuous use of time: about 10 hours (When not in use, automatically turn off after 5 minutes)
| Mode | Max. Capacity | Min. Resolution | ||||||
| N | kgf | gf | lbf | N | kgf | gf | lbf | |
| ST-8610A | 10.000 | 1.000 | 1000 | 2.204 | 0.001 | 0.001 | 0.1 | 0.001 |
| ST-8610B | 20.00 | 2.000 | 2000 | 4.408 | 0.01 | 0.001 | 1 | 0.001 |
| ST-8610C | 50.00 | 5.000 | 5000 | 11.02 | 0.01 | 0.001 | 1 | 0.01 |
| ST-8610D | 100.00 | 10.000 | 10000 | 22.04 | 0.01 | 0.001 | 1 | 0.01 |
| ST-8610E | 200.0 | 20.00 | — | 44.08 | 0.1 | 0.01 | — | 0.1 |
| ST-8610F | 500.0 | 50.00 | — | 110.2 | 0.1 | 0.01 | — | 0.1 |
- ©Copyright@SATA TECHNOLOGY CO., LTD
- Tel：+86 769 83814636 FAX：+86 769 83509758
- Address：Changping Town, Dongguan City, Guangdong Province, China 523560
