Navigation:SATA TECHNOLOGY CO., LTD >>Product >> Environmental Test equipment >> ST9605 Oxygen (air) bomb aging oven
Product

ST9605 Oxygen (air) bomb aging oven

Introduction

ST9605 Oxygen (air) bomb aging oven

Product Details

ST-9605 Oxygen (air) bomb aging oven

Standards: According to GB/T2951.12,IEC60811-1-2,IEC60335-1,GB4706.1,GB 4706.8,,IEC60335-2-17,GB/T5013.2,IEC60245-2 etc.
Applicable scope: This machine applies to aging test for electrical wires & cables & rubber jacket& plastic & artificial leather, and other macromolecule materials. (Aging test via oxygen and compressed air in specified pressure and temperature) .
Technical parameters:
  1.  Maximum pressure: 2.5MPa
2.  Safety blow-up pressure: 2.73 MPa
3.   Pressure gauge: 04MPa,minimum scale 0.02Mpa
4.   Temperature controlling range: RT-150
5.  Effective volume: ≥4000cm3
6.  Temperature fluctuation: ±0.5
7.  Thermal ageing methods:
7.1 Ageing in an air bomb: Air as medium, with the temperature 127,pressure 0.55±0.02MPa
7.2 Ageing in an oxygen bomb: Oxygen as medium, with the temperature 70,pressure 2.1±0.07MPa
8.   Procedure of releasing pressure: As soon as the ageing period is completed, the pressure shall be released gradually so as to reach atmospheric pressure in not less than 5min
9. Timer: 0.01S9999H. Voice alarm when reach the pre-set value.

  • ©Copyright@SATA TECHNOLOGY CO., LTD
  • Tel:+86 769 83814636 FAX:+86 769 83509758
  • Address:Changping Town, Dongguan City, Guangdong Province, China 523560
Keywords:Aging Oven, Aging Chamber, Oxygen aging Oven