ST-9609 Thermal Stabilization Tester

ST-9609 Thermal Stabilization Tester

Standards: According to IEC 60811-3-2: 1985 and GB/T2951-2008 etc.

Range: Applies to the soft PVC of wires & cables, plastic insulation sheath for thermal stabilization testing at 200±0.5℃.

Technical parameters:

   1. Test samples: 3 samples can be testing at same time;

   2. Size of glass tubes: ID is 4mm, OD is 5mm and length approx.110mm with one end was closed;

   3. Temperature meter: PID temperature controller which resolution is 0.1℃

   4. Temperature range: RT +5~250℃

   5. Capacity of oil bath: 1000ml

   6. Timer: 0.1~99.99S/M/H can be adjustable;

   7. Power supply: AC 220V±10% or others as custoner request for design.