ST-6605HP High Temperature Pressure Device

ST-6605HP High Temperature Pressure Device

Standards:  According to GB/T 2951.6, VDE 0472Part609, IEC 60811-3-1 etc. standards;

Applicable rang: Applied to measurement the insulation of wire & cable and sheaths under the heat and load condition for test the deformation, the median of the indentation value shall be not more than 50% of the mean value of the thickness of test piece;

Technical Parameters:

1. Rectangle edge thickness: 0.7±0.01mm;

2. Load weight: 3 group of 1, 2, 5, 10, 20, 50, 100, 200, 500 and 1000g 1～1000 (10 kinds );

3. Thickness of sample: Insulations and sheaths ≥ 0.4mm;

4. Length of sample: 50-100mm;