ST-6604XXZ Cable to Cable Abrasion Resistance Tester

ST-6604XXZ Cable to Cable Abrasion Resistance Tester Standards: According to STD525-0001 (VOLVO), reference NF R13-415, VW60306: 2000-11 and GS95007-1: 2007-08 and BS EN 3745-511 Used range: This Tester meet the conductor cross-section of auto cables less than 6mm2, under move at a special frequency, the insulation abrasion resistance test base on cable against cable, then to detect the features of auto cables abrasion resistance Technical parameters: 1)Vibration table vibration frequency: 10Hz 2)Amplitude: 6.35±0.25mm and Horizontal vibration 3)Fixed the two ends of test cable on the movable part which width is 280mm 4)The movable cable under the movable part, one end of cable fixed it on the fixed post, another end of cables through the axis 5)Diameter of axis(support rod): It is large than 14 times of sample diameter, as actual need to make 6)Distance between movable table and fest table, the distance is 45mm 7)Short circle check: DC 24V /30mA 8)Others function: Short circle with alarm 9)Weight: a) As GS95007 & STD525-0001: 10N, 12.5N, 15N, 20N(option). b) Or 1000g, 1250g, 1500g, 2000g (Standard) 10)When cable against cable abrasion and the insulation is broke, the conductor is contact, the machine will stop automatically. 11)Counter: 1-9999 times can be preset as need. 12)Speed: 1-500cycles/min can be adjusted as your need. Note: 1cycle=back and forth