Navigation:SATA TECHNOLOGY CO., LTD >>Product >> Density Meters >> MH-200A High Precision Electronic Densimeter
Product List
- New Products
- Wire & Cable Testing Equipment
- Flammability Test Equipments
- Material Testing Machines
- Environmental Test equipment
- Optical Measurements
- Hardness Meters
- Safety Instruments
- Density Meters
- Accessories of Tensile Machine
- PID Temperature Control Meters
- Automatic Locking Screw Machin
- Other Testers
Product
MH-200A High Precision Electronic Densimeter
Introduction
Product Details
MH-200A High Precision Electronic Densimeter
Standard: According to ASTM D972, GB/T1033, JIS-K-6268, ISO2781, GB/T 2951.3, VDE 0472 Part 601 and 612, UL1581, IEC 60811-1-3 etc.
Range: Rubber, plastic, glass, wire and cable, shoes, noble metal, rigid alloy, compound materials.
Principle: The principle of Archimedes buoyancy method, accurate, direct reading measurement values.
Functions:
1. Only 10 seconds for 2 steps for testing, can be directly reading the proportion, Volume value and purity (%)
2. The accessories used molding parts, will not cause water leakage
3. RS-232C interface , easy to connect PC and printer
4. Big water tank design (Max size of solid is D100* W70 * H25mm), reduce the error of buoyancy of hang-line
5. Can be direct set the temperature compensation and solution set compensation.
6. Accuracy of min. weight is 0.005g, Proportion calculation resolution is 0.001g
7. Can be set the standard density of materials, then direct reading the purity(%)
8. Used the corrosive liquids, optional anti-corrosion water tank
9. Can be testing the Grain, powder, floating samples measured readily
6. Simple operated and convenience
Technical parameters:
Measuring range: 0.01-200g
Kinds of test sample: Solid, Grain, Film, and Floating body.
Test time: About 5s
Density range: >1, <1 both can be testing
Density precision: 0.001g/cm3
Setting: Can be set the temperature compensation and liquor compensation
Display: Can be direct show the value of density.
Standard interface: RS-232
Accessories:
1. Anti-floating frame (for testing the density of film, floating-body)
2. Special measuring part for Grain material
3.Corrosion-resistant water tank (for different samples of alcohol as the media for reduce the surface tension of water, and the alcohol with corrosive, use the corrosion-resistant water tank can be extend the life)
Note: Testing steps
1. Put the test sample on measuring stage for weighting and memory
2. Then put it into the water and weighting and memory, reading the test result at once.
Last Page：Mark 210A Precision Balance
Next Page：MH-200E High Precision Electronic Densimeter
- ©Copyright@SATA TECHNOLOGY CO., LTD
- Tel：+86 769 83814636 FAX：+86 769 83509758
- Address：Changping Town, Dongguan City, Guangdong Province, China 523560
